{"product_id":"sanwa-fh5-nano-receivers-fh5nano","title":"Sanwa FH5 NANO Receivers #FH5NANO","description":"\u003ch1\u003e Sanwa FH5 NANO Receivers #FH5NANO\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFH5 Bind:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e1.Turn on transmitter, enter [BIND] to be bind mode.\u003c\/p\u003e\n\u003cp align=\"start\"\u003e2.Press the BIND button then turn on receiver.\u003c\/p\u003e\n\u003cp align=\"start\"\u003e3.LED will change from slow flashing blue to fast flashing blue.\u003c\/p\u003e\n\u003cp align=\"start\"\u003e4.Turn off receiver, then turn on.\u003c\/p\u003e\n\u003cp align=\"start\"\u003e5.Finish BIND mode on transmitter.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGYRO sensitivity Adjustment:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003eThe gyro sensitivity is controlled by CH3 value which could be adjusted on the transmitter. When the CH3 value is 50%, the sensitivity is zero. Turn CH3 value to 0% or 100% both can reach 100% sensitivity. Turn CH3 value to 0% or turn CH3 value to 100% will have different sensitivity curve. The GYRO provides 2 different optimized sensitivity curves for drifting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003e\u003cstrong\u003eGyroscope EPA Adjustment:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003eFirst adjust (left and right steering) on the transmitter, the EPA value you need.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003e\u003cstrong\u003eEPA (Travel) Setting (Gyro forward setting):\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003ePress the \"SETUP\" button, turn on the GYRO. When the LED starts blinking fast, wait for the LED to blink slowly and the gyroscope is now in EPA (travel) setup mode, release the \"SETUP\" button. First turn the remote control to the left \"EPA\" position (the left end of the chassis) and stop there for a few seconds, when the left \"EPA\" position is saved in the gyroscope, the servo will automatically return to the middle position. Then turn the remote to the correct \"EPA\" position (right end position of the chassis) and stop there for a few seconds, when the correct \"EPA\" position is saved in the GYRO and EPA (drive) settings, the SERVO will automatically return to The middle position has been completed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003e\u003cstrong\u003eEPA (Travel) Setting (Gyro Reverse Setting):\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003ePress the \"SETUP\" button, turn on the GYRO. When the LED starts blinking fast, wait for the LED to blink slowly and the gyroscope is now in EPA (travel) setup mode, release the \"SETUP\" button. First turn the remote control to the right \"EPA\" position (the right end of the chassis) and stop there for a few seconds, when the left \"EPA\" position is saved in the gyroscope, the servo will automatically return to the middle position. Then turn the remote to the \"EPA\" position on the left (left end position of the chassis) and stop there for a few seconds, when the correct \"EPA\" position is saved in the GYRO and EPA (drive) settings, the SERVO will automatically return to the middle position has been completed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp align=\"start\"\u003e\u003cspan\u003e\u003cstrong\u003eAfter the above settings are completed, please re-adjust the EPA value on the transmitter, and adjust the value according to the steering of your car chassis to the value you need.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Rc Race Control","offers":[{"title":"ARIEL","offer_id":43018359242815,"sku":"FH5NANO-1","price":38.0,"currency_code":"GBP","in_stock":true},{"title":"NO ARIEL","offer_id":43018359275583,"sku":"FH5NANO-2","price":38.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/8955\/2959\/files\/S960d0905252f4a9b946ec4cf54a20263T.webp?v=1773806975","url":"https:\/\/rcracecontrol.store\/en-gb\/products\/sanwa-fh5-nano-receivers-fh5nano","provider":"RcRaceControl","version":"1.0","type":"link"}