Lamp control:
The output voltage of the channel connected to the LED is 5 V, which can be used as a high-level drive relay of the module. Can be connected to LED light, can also be used as an external switch with a high degree of reproduction.
Low voltage signal:
Automatic identification battery 2 S / 3 S, the default alarm voltage of 2 S batteries is 7.2 v, and the default alarm voltage of 3 S batteries is 10.7 v
Specifications:
Product:FZD Light Controller
Connection
CH2: electrically modulated signal line (6V output, supports high voltage)
CH3: enable / disable control signal
LED: connected to headlights (5V output)
M1: Coupling motor
BUZ: beep (low voltage signal)
Power : Connect the battery
Item Size:35*21*13mm
Item Weight:11g
Two types of connection:
Car controller:
CH2: 2 channels
CH3: 3 channels
LED: Headlights
M1: engine
Buz: Low Voltage Alarm
Aircraft control panel:
CH2: 3 channels
CH3: Connecting a two-stage switch
LED: light lamp
M1: engine
Buz: Low Voltage Alarm
Material: Plastics
Number of LED bulbs: 12
Input voltage: 4.8V - 6.0V
Working Current: 100mA
Lights colors: yellow light * 2, blue light * 1, red light * 1, white light * 2,
Lamp bead diameter: All 12 lights are 5mm / 12 lights except 2 headlights 5mm,the rest 3mm(Random)
Circuit board size: 55*35*15.8mm
Suitable for: 1/10 RC cars
Remarks: 2 lamp beads of color, namely 6 lamp wires and 12 lamp beads, the total length of each wire 410mm
Note:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.make sure you do not mind before you bid.Thanks!
