HOBBYTECH 1/10 Brushless BXR.MT Limited Edition with Battery and Charger - HT-BXR.MT.LIMITED
HOBBYTECH 1/10 brushless BXR.MT with battery and charger - HT-BXR.MT
The BXR.MT is a new 1 / 10th XL Monster Truck platform with unrivaled power on the market!
The platform incorporates the technical characteristics of the BXR.S1 with in addition many reinforced parts:
Front and rear triangulation, aluminum front and rear shock absorber support, aluminum cell reinforcements, aluminiulm reinforcement bar support, all mounted on new Monster 132 x 57mm tires.
Out of its box, the vehicle is delivered with front and rear metal pinion differentials as well as an adjustable central slipper, high-volume shock absorbers entirely in aluminum and "CVD" type universal joints at the front complete a transmission made up of universal joints. steel and fully mounted on bearings.
An aluminum frame and side splash guards allow the vehicle to withstand all racing conditions. Powered by a 50Amp waterproof drive and 3500kv brushless motor for maximum power and top speed.
WARNING: This vehicle is a monster of power!
Dimensions
Height / Height max. : 204
Wheelbase / Wheelbase: 285
Front width / Track (front): 312
Rear width / Track (rear): 318
Front ride height / Front ground clearance: 61
Rear ride height / Rear ground clearance: 64
Weight / Total weight: 2295
Radio Konect Specs:
2.4Ghz KN-KT2S-PLUS / SET
Servo direction
reversal ATV (dual rate)
potentiometer on channel 1 TRIM potentiometers for channels 1 and 2
Electronic limit switch adjustment on channels 1 and 2
Weight: 300g
KT2S Receiver + 2 Channels
Dimensions: 38 × 23.5x14mm
Weight: 8g
Brushless motor Specs
1/10 Konect KN-3652SL-3250KV
Compatible 10.8V Ni-MH and 2-3S Li-Po
Dimensions: Φ = 36mm - L = 52mm
Shaft: Φ = 3.175mm - L = 15mm
Resistance: 0.0085 Ω
Poles: 4
Amp: 4.2A
Weight: 199 g
Konect Brushless ESC Specs
50A Waterproof KN-10BL50-WP Controller
Special for 1 / 10th cars (Track and buggy)
Compatible Sensorless brushless motor
50A continuous
power 300A peak power
Resistance 0.0010 Ω
Motor limit 5500 Kv in 2S and 3500 Kv in 3S
Power supply 4 to 9 elements in nimh
Power supply 2 to 3S in Lipo (11.1v)
BEC: 6v / 3A
Dimensions: 48.5x38x32mm
Weight: 90g
Thermal protection
Programmable via external card (not supplied)
DEAN connector
Contents of the box version only:
• Monster 1 / 10th XL BXR.MT Pre-decorated version without batteries and without charger
• KT2S + radio system
• Instruction manual
• 3600mah 7.4v Lipo Battery
• USB Charger
Not Included :
- 4 (AA) type batteries
- Various model building tools
